Winchester Industrial Loads are specifically for use in 8 gauge Winchester Ringblaster and Western Industrial Tools - when used together, they enable you to create a highly effective “impact system” tailored to meet your specific needs.
Velocity: Magnum
Projectile Weight: 2oz Zinc
Hull Material: Paper Wrap Plastic
Load Description: Used for hard crust and soft inside build-up. Also used when lead contamination is an issue. This zinc load can be used without the rifled barrel extension.
Velocity: Magnum
Projectile Weight: 3oz Zinc
Hull Material: Paper Wrap Plastic
Load Description: Used to remove obstructions 40 feet from the shooting port and beyond. Zinc is a non-toxic material and these loads should be used in place of lead when contamination is an issue. Used for the removal of very hard clinker rings and for ferro-alloy furnace tapping.
Load Note: The patented rifled barrel extension is recommended when using this load.
Velocity: Medium
Projectile Weight: 3oz Zinc
Hull Material: Paper Wrap Plastic
Load Description: Used when contamination from lead loads is an issue and magnum loads are too powerful.
Load Note: The patented rifled barrel extension is recommended when using this load.
Velocity: Low
Projectile Weight: 2 7/8 oz Zinc
Hull Material: Paper Wrap Plastic
Load Description: Used on soft obstructions and for close applications where lead contamination is an issue.
Load Note: The patented rifled barrel extension is recommended when using this load.
Velocity: Medium
Projectile Weight: 3 oz Lead
Hull Material: Paper Wrap Plastic
Load Description: Used on obstructions of softer materials and in shorter kilns to avoid damaging end plates and feed pipes.
Velocity: Magnum
Projectile Weight: 3 oz Lead
Hull Material: Paper Wrap Plastic
Load Description: Used to remove obstructions 40 feet from the shooting port and beyond. These rounds are to be used for removal of very hard material and for the removal of clinker rings.
Velocity: Magnum
Projectile Weight: 1 5/8 oz Frangible
Hull Material: Paper Wrap Plastic
Load Description: This is a specialty load used for shooting at close range-nose rings, in coolers. Projectile will fragment upon impact.
Velocity: Magnum
Projectile Weight: 2 oz Lead
00 Buckshot 20 Pellets
Hull Material: Plastic Hull
Load Description: Used for close range shooting of hard material such as build-ups in storage bins, silos, cyclones adn dust collectors. Also for nose ring removal.
Velocity: Low
Projectile Weight: 3 oz Lead
00 Buckshot 24 Pellets
Hull Material: Plastic Hull
Load Description: Used to removed ash build-up. Use this load to remove the large build-up, then switch to the lighter CE8HV2P and CE8LV2P loads to prevent tube damage. The full choke attachment is not effective with this load.
Load Note: *should never be used while boiler is on line.
Velocity: Low
Projectile Weight: 3 oz #2 Shot
Hull Material: Plastic Hull
Load Description: Used in electric power plants for ash build-up removal 40+ feet from shooting port. Can be used on ash build-up while power plant is on line. If the build-up is beyond 40 feet, Winchester recommends using the full choke extension.
Velocity: Magnum
Projectile Weight: 3 oz #2 Shot
Hull Material: Plastic Hull
Load Description: Used for ash build-up removal in electric power plants. SHould be used on build-up beyond 40 feet away from shooting port. When using this load for distances beyond 60 feet, Winchester recommends using the full choke extension.